My latest.....Bud

CSC Opportunity, NOCO, CA, All Source Intelligence Analyst

CSC is actively searching for an All Source Intelligence Analyst to help support the Naval Surface Warfare Center, Corona Division, at the Norco, CA. location. Department 40/41.
In this position the candidate will perform the vital role of All Source Analyst in support of the Pattern Analysis Lead Engineer (PALE) Team.  As a member of the team assists in the development of Brigade Combat Team (BCT) Counter-Improvised Explosive Device Support Team (CSE) and Brigade Support Team (BST) Working Group (WG) staff personnel as a replicator of the Operation Research and Systems Analysis (ORSA) role.  The PALE team will provide, as per the requirements of BCT staff, any and all trends analysis and predictive assessments as might be expected of the Operations Research and Systems Analyst in support of the Counter-IED Support Element or Brigade Support Team.  Additionally candidate should be prepared to provide the replication of, emulation of, or coaching and mentoring of capabilities and abilities of each respective CSE/BST element in addition to ORSA responsibilities as a PALE Analyst.  Finally, the PALE All Source Analyst will provide any and all pattern analysis and predictive assessment as regards BCT C-IED Operations, C-IED intelligence development, ISR application and employment, predictive assessment protocols or mentoring and coaching as required.  This support will be done in cooperation with and supported by NSWC Corona, PALE Support Team subject matter experts in BCT Operations, Intelligence, and Statistics. 
Qualifications
·        5+ years experience as a U.S. military coded Intelligence professional with practical experience within OIF or OEF theaters of operation at Brigade or Battalion echelons.
·        Bachelor's Degree in Physical or Social Science disciplines from an accredited University is mandatory. 
·        Experience in statistical analysis and/or Six Sigma is highly valued.
·        Experience in Link Association programs (such as Analyst Notebook) and ArcGIS are a plus.
·        Strong communication skills to interact with team members, support personnel, and provide technical guidance and expertise to customers and management.
·        Ability to work in a self-directed work environment.
·        Ability to work in a team environment.
Candidate must be in adequate physical condition for routine, interim field assignments at Combat Training Centers (CTC) and remote test sites.  Must be able to travel to remote test sites approximately once a month; must be able to lift up to 80 lbs; have good close vision, distant vision, depth perception, and the ability to bring objects into sharp focus.
 
Candidate must be a U.S. Citizen and must possess and maintain a SECRET security clearance.
 
Interested Candidates - Please submit your resume on-line at http://www.csc.com/careersus/flx/16177-job_opportunities  and enter 10006R5 for this position in Norco, CA USA.
 
POC:  Shirley Blau, O 951.898.3142, M 714.404.1144, sblau@cscnorco.com 

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Northrop Grumman (TASC) Opportunities, San Diego, CA, Information Assurance/Information Technology
We are looking to hire individuals with knowledge of and experience with Information Assurance and Information Technology at our San Diego location. Not positive yet what the exact number will be. Any interested applicants can contact me via email (Brian.Guenther2@ngc.com).
 Potential skills/responsibilities include:
·         Strong knowledge of and implementation experience in applying US Government C&A regulations, policies, and processes (e.g. DIACAP, NIST regulations and/or NISPOM Chapter 8, etc.) in a government environment.
·         Interface with government liaisons and contractors to integrate and verify IA objectives and functions, as specified by DoD IA related policies and directives, for successful system certification and accreditation (C&A)
·         Manage multiple tasks which may include requirement and interface development, test development, and certification planning
·         Participate in risk analysis, cost trades, performance, reliability, and security impact analysis to determine the appropriate IA products, systems, and policies
·         Coordinate, develop, manage and file Certification & Accreditation (C&A) documentation relating to a varied range of the US Government information assurance processes
·         Planning, installing, operating, maintaining and managing test networks, systems and service connectivity between local and remote test sites.

POC:  Brian Guenther, PMS 485 TD Support Manager, (619) 542-2218, brian.guenther2@tasc.com

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Northrop Grumman Opportunities, Rancho Bernardo CA:

A. #110126 Systems Test Engineer 4
Systems Test is looking for a Lead Test Engineer to plan, execute,
implement, operate and support software/hardware integration efforts
for Software Engineering Laboratory (SEL) facility. This position
will be located in Rancho Bernardo, CA. Key responsibilities include
and/or are not limited to: Collaborative requirement analysis with
software development and software test teams to assure laboratory
software/hardware configuration conformity to requirement needs.
Provide hands on technical and developmental support for SEL segment
hardware, not limited to SW/HW troubleshooting, investigation,
analysis, and repairs and software patching. Manage administration
needs to support and schedule, segment equipment integration and
testing efforts in an engineering software development environment.
Coordinate segment equipment changes, modifications and upgrades of
SEL equipment with other programgroups. Maintain laboratory
configuration, Drawings, Change Notices, Inventory Control, CM/QA
Compliance, Safety, 5S to Test and Evaluation standards. Applicant
must have working knowledge of Mil-STD1553B, ARINC-429, IEEE-1394, RS
232/422/485, 10/100/1000 Ethernet, and Fiber Channel and associated
testequipment. This position requires excellent written and verbal
communication skills and experience reviewing software/hardware
design drawings or other artifacts.
BASIC QUALIFICATIONS: Bachelors Degree in Computer Science, Software
Engineering or related discipline with 14+ years experience (12 years
with a Masters) performing software development, SW/HW integration
and System Test, specifically including the authoring of SW test
plans and procedures. Experience in scheduling tasks using Microsoft
Project and in using Earned Value Management System is required.
Candidate must be a US Citizen with a DoD Top Secret clearance and
the ability to obtain access to a special accessprogram. PREFERRED
QUALIFICATIONS: Ideal applicants will have experience testing C4ISR
systems or derivatives of such systems. Preferred applicants will
have experience with Unix/Linux and Windows 2003 Server Operating
systems, and programming experience with, C#, Python, Java, or Perl.
Please apply online at www.careers.northropgrumman.com

B. # 106418 System Test Engineer 5
Advanced Programs is looking for a Lead Test Engineer to plan and
execute software/hardware integration for the Ground Control portion
of a complex Unmanned Air Vehicle system. Key responsibilities
include the development of system/subsystem Verification Plans to
demonstrate requirements compliance, evaluation of requirements for
testability, and leading the development of Test Procedures for
system Qualification Testing. The candidate will perform and oversee
segment-level integration testing, characterize the performance of
the Ground System and communicate results via presentations and
written Test Reports. This position requires excellent written and
verbal communication skills and experience reviewing software design
artifacts.
BASIC QUALIFICATIONS: Bachelors Degree in Computer Science, Software
Engineering or related discipline with 14+ years experience (12 years
with a Masters) performing software development, SW/HW integration
and System Test, specifically including the authoring of SW test
plans and procedures. Experience in scheduling tasks using Microsoft
Project and in using Earned Value Management System is required.
Candidate must be a US Citizen with a DoD Top Secret clearance and
the ability to obtain access to a special accessprogram. PREFERRED
QUALIFICATIONS: Ideal applicants will have experience testing
Unmanned Air Vehicle Ground Segments. Preferred applicants will have
experience with DOORS, MagicDraw, JAVA, and computer networking.
Advanced Degree in Computer Science, Software Engineering or related
discipline.
Please apply online at www.careers.northropgrumman.com

POC: Jennifer Siemens, 310-331-3639, jennifer.siemens@ngc.com

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Northrop Grumman Opportunities, San Diego, CA

A.  Supportability/Reliability Engineer 2, Posting ID:  109657
Description:
Responsibilities include analysis and development of requirements for
maintenance, spares, support equipment, technical data, training, and
facilities. Candidate will be responsible for all phases of product
development, with performance of design for supportability, trade
studies, detailed task analysis, Reliability Centered Maintenance
(RCM), LSA significant item identification, use of failure mode
identification and criticality information, Support Equipment
analysis, maintenance plan development, and associated updates.
Position responsibilities include direct interface with customer,
travel and ability to multitask. Basic Requirements: BS degree in
electrical engineering or mathematics plus a minimum of five years of
related experience or an MS degree in electrical engineering or
mathematics and a minimum of three years of related experience. The
applicant must be aware of the Systems Engineering approach and
understanding of information technology systems and networks. The
applicant should also have some knowledge of military standards and
DOD information security requirements. Proficiency with the use of MS
Office and PC based analysis tools are required. Preferred
Experience: A candidate with excellent communication skills and the
ability to work in an Integrated Product Team atmosphere. Experience
with Technical Documentation and/or Military Standards are desired.
Verbal and writing skill are required to discuss analysis and
results. Innovative thinking is a key characteristic for this
position. Must be a US Citizen with the ability to obtain a Security
Clearance Required. No relocation assistance is available for this
position currently. This position has a projected need date of March
2010. Qualified candidates must have a BS with 2 yrs of exp, A
combination of work exp may be substituted in lieu of degree.
Security Clearance Required.

B.  Tactical Data Link Engineer 3, Posting ID:  110087
Description:                           
The following are the basic qualifications for this position: BS in
technical field and at least 5 years specific experience or similar
experience in related field and military technical equivalent. The
Field Operations Engineer will be part of a team operating a complex
tactical system, providing voice and data services in a sustained
operational located overseas and CONUS. Duties include operating and
maintaining the ground node portions of network communications
system, procedure and report development, and assisting in the
development and implementation of the CONEMP/CONOP. The candidate
will work closely with the Active Duty/Government customer as well as
internal NG Integrated Product Teams (IPTs). Extended travel to
hazardous overseas duty locations required. MUST have a
Current/Active Secret (or above) clearance in order to be considered.
Candidates without an active secret clearance will not be considered.
Must be able to work under supervision, as well as independently.
Must have above average communication skills (both written and
verbal) and be able to write reports. Must be able to travel (up to
75%) Must Have: Strong Tactical Data Link experience and
computer/network experience with troubleshooting abilities.
Experience with loading software applications Understanding of TCP/IP
and associated network components such as Switches, Routers, and
Firewalls Strong knowledge of Client Server relationships, and of Web
and application Servers. Strong knowledge of network administration.
Ability to interface directly with customers. Must have strong
knowledge of TDL MIL-STDs to include Link-16, VMF, SADL, SAT-J and
JREAP. Must have prior experience with PRC-117, PSC-5, ARC-210, SADL,
MIDS LVT1/2/3/11 and General RF Knowledge. Must have working
knowledge of Simple Key Loader (SKL). Should have: Strong technical
and operational experience in server based networks, routers.
Briefing skills, good working knowledge of MSOffice (Word,
PowerPoint, Excel, Project) Formal developmental and/or operational
testing experience desired. WAN and LAN large program phased system
integration, multiple data link operational knowledge to include
narrowband and wideband communications, knowledge of software test
tools and their application for automated testing. Military network
and data link communications experience is strongly recommended.
Experience in system level testing, stress & performance testing.
Experience in some scripting language like Perl or Python. Experience
in IP layer 2/3 (switching/routing), firewall, WAN optimization VPN,
TCP/IP, UDP, DHCP. Experience with Networking protocols required
(TCP/IP,SNMP,TR-069, TR-104, etc.) Familiarity with test tools and
techniques, test design and execution Familiar with using various
line cards and network traffic generators (IXIA, Agilent, Spirent).
Familiar with test automation. Familiar with testing IP
Routing/RIP/OSPF/BGP/MPLS/QOS. Security Clearance Required.

C.  Property Control Support 3, Posting ID:  110084
Description:
Position is in support of logistics Material Management for the
Battlefield Airborne Communications Node (BACN) program. Principal
duties include: a) Providing technical support and guidance by
answering questions from users regarding how to access information
and where information is located, b) Running technical reports and
queries to off-site locations that do not have access to the
database, c) Identifying potential process improvements, d)Preparing
government property reports by extracting and compiling information
for annual property financial reports, e) Investigating and reporting
lost, damaged, or destroyed government property, f) Supporting the
Sr. Manager, Group Property Administration by reviewing new contract
to identify clauses and special provisions relating to property
administration, g) Performing internal audits of the property
function to ensure compliance of approved procedures, h) Updating and
distributing Property Procedures Manuals, i) Using a variety of
hardware and software packages such as word processors, spreadsheets,
and databases to perform sometimes complex administrative duties, j)
Making travel arrangements and preparing expense reports and k)
Coordinating and scheduling meetings and training classes. No
relocation assistance is available for this position. Qualified
candidates must have a High School diploma coupled with 4 years of
education or work experience. Must have or be able to obtain a secret
clearance, have knowledge of FAR and familiarity with NORTHROP
GRUMMAN property management policies and procedures. Experience in
supply chain, inventory, ILS, depot or production management would be
preferred. Experience in PBL contracts will be a plus. No relocation
assistance is available. Position may require travel as needed. This
position requires physical ability to work around equipment in test
labs and on ships and aircraft. Manual dexterity sufficient to use
keyboards and control panels. Security Clearance Required.

D.  Engineer System Safety 3, Posting ID:  104047
Description:
This is a lead position is in support of the Airworthiness
Certification and Safety Program Development for the Battlefield
Airborne Communications Node (BACN) program. The qualified applicant
will lead development and integration of Modified Airworthiness
Certification Criteria (MACC) and Safety Procedures for payload
operators on the Global Hawk Unmanned Aerial Vehicle in compliance
with MIL-HDBK-516 and MIL-STD-882D. Facilitate Safety Working Group
(SWG) meetings to ensure the program milestones and aggressive
schedule are met. Perform and conduct reliability and safety analyses
of systems utilizing established methods and procedures to ensure
product designs are in conformance with company and customer
reliability and safety standards. Provide technical assistance to
assigned organizations as required. Uses standard desktop (PC)
computer Windows-based tools to produce original documents including
plans, procedures and reports. Should be well organized, effective
working independently as well as in a team environment, able to
handle multiple assignments and possess good oral and written
communication skills. Candidate must have an understanding for gold
mining for data and be capable of generating realistic assumptions to
developing credible engineering analyses. Analyses include fault tree
analyses (FTA) and system safety analyses (SSA). Identify
certification and specification compliance methods for reliability
and safety. Define and coordinate required testing to demonstrate
compliance with reliability and safety requirements. Review
contractual requirements and certification requirements for
reliability and safety implications. Basic Requirements BS in
Mechanical Engineering, Electrical Engineering or related field and 5
yrs experience. 4 years of RMA experience on a military program.
Experience performing system safety analyses (i.e. PHL, PHA, SSHA,
SHA, O&SHA). A working knowledge of MIL-STD-882D. Experience with EVM
Processes. Additional Information: Candidate must be a US citizen
with the ability to obtain DoD Security Clearance Required. Assets
Experience in qualifying EMI/EMC and Environmental requirements by
analysis. Understanding of Airborne equipment installation and
operaterations. Experience with AutoCADD a plus. Should be
experienced in RF Communications Equipment packaging for airborne
platforms. Certified Reliability Engineer is a plus. Experience in
aviation maintenance procedures, COTS equipment logistics and IEEE
standards is a plus. Familiarity with military and FAA safety
standards and procedures in addition to the MIL-STD-464, Air Force
System Safety Handbook, and MIL-STD-1472. Knowledge of HERP/HERO/HERF
is a plus. Experience with DOOR's is a plus. Experience with PDR,
CDR, and FDR presentations is plus. MULTIPLE POSITIONS. Relocation
Assistance Available. Security Clearance Required.

E. Engineer System Safety 4, Posting ID:  104048
Description:
This is a lead position is in support of the Airworthiness
Certification and Safety Program Development for the Battlefield
Airborne Communications Node (BACN) program. The qualified applicant
will lead development and integration of Modified Airworthiness
Certification Criteria (MACC) and Safety Procedures for payload
operators on the Global Hawk Unmanned Aerial Vehicle in compliance
with MIL-HDBK-516 and MIL-STD-882D. Facilitate Safety Working Group
(SWG) meetings to ensure the program milestones and aggressive
schedule are met. Perform and conduct reliability and safety analyses
of systems utilizing established methods and procedures to ensure
product designs are in conformance with company and customer
reliability and safety standards. Provide technical assistance to
assigned organizations as required. Uses standard desktop (PC)
computer Windows-based tools to produce original documents including
plans, procedures and reports. Should be well organized, effective
working independently as well as in a team environment, able to
handle multiple assignments and possess good oral and written
communication skills. Candidate must have an understanding for gold
mining for data and be capable of generating realistic assumptions to
developing credible engineering analyses. Analyses include fault tree
analyses (FTA) and system safety analyses (SSA). Identify
certification and specification compliance methods for reliability
and safety. Define and coordinate required testing to demonstrate
compliance with reliability and safety requirements. Review
contractual requirements and certification requirements for
reliability and safety implications. Basic Requirements BS in
Mechanical Engineering, Electrical Engineering or related field and 9
yrs of experience. Seven years of RMA experience on a military
program. Experience performing system safety analyses (i.e. PHL, PHA,
SSHA, SHA, O&SHA). A working knowledge of MIL-STD-882D. Experience
with EVM Processes. Additional Information: Candidate must be a US
citizen with the ability to obtain DoD Security Clearance Required.
Assets Experience in qualifying EMI/EMC and Environmental
requirements by analysis. Understanding of Airborne equipment
installation and operaterations. Experience with AutoCADD a plus.
Should be experienced in RF Communications Equipment packaging for
airborne platforms. Certified Reliability Engineer is a plus.
Experience in aviation maintenance procedures, COTS equipment
logistics and IEEE standards is a plus. Familiarity with military and
FAA safety standards and procedures in addition to the MIL-STD-464,
Air Force System Safety Handbook, and MIL-STD-1472. Knowledge of
HERP/HERO/HERF is a plus. Experience with DOOR's is a plus.
Experience with PDR, CDR, and FDR presentations is plus. MULTIPLE
POSITIONS. Relocation Assistance Available. Security Clearance
Required.

POC:  Dirk Rippelmeyer, Dirk.Rippelmeyer@ngc.com. 
2.  Northrop Grumman Opportunities, San Diego, CA 

F. Technical Editor and Writer 4, Posting ID:  104336
Description:
Candidate will be responsible for some or all aspects of technical
documentation and training according to the following descriptions.
Technical Documentation - 1) Developing a variety of technical
manuals to include: Maintenance Manuals, Operation Manuals, System
Admin Manuals, and Software User Manuals. 2) Producing materials in
various formats from Microsoft Office applications to electronic
IETMs in XML, using contractor format, military specifications,
S1000D or others. Candidate should be familiar with authoring tools.
Lead and provide oversight in the following areas Training - 1)
Develop training materials, including course outlines, student and
instructor guides and classroom materials, 2) Deliver customer
training by podium/classroom, over-the-shoulder, on-the-job, in the
field, 3) Must be comfortable with training, interfacing with
customer, continual material development, and travel. General duties
include, but are not limited to, researching data, interpreting
engineering drawings and documents, understanding system operation,
conducting customer reviews and incorporating review comments.
Ability to interface with engineering, program office, and customer
is required. Candidate must be detail-oriented self-starter willing
to work in a fast paced and dynamic environment. Ability to work
independently and in a team environment is important. Minimum 15
years related experience working on technical platforms, and/or
technical degree required.This is a lead position is in support of
the development of Aircraft Payload Maintenance Procedures for
Aircraft platforms and solutions. The qualified person will
coordinate processes with flightline operating personnel. Develop
procedures for FOD, tool control, Fuel and Oil, HAZMAT and logistics
support in accordace with AFI21-101. Schedule and coordinate the
development and validation of procedures with other program
departments including integration and test. Lead the creation of
maintenance procedure manuals and associated documentation.
Facilitate the incorporation of new procedures to augment current
maintenance procedures in place. Prepare presentations and
requirements documents to obtain resources and update status as
necessary. BS in an Engineering or education related field. 9 years
of maintenance experience with military aircraft. Experience
performing maintenance task analyses. Must have attained an Air Force
2A7X2 5-level or equivalent Maintenance Certification. Experience
with EVM Processes and Miscrosoft Office Tools such as Word, Excel
and Powerpoint. Additional Information: Candidate must be a US
citizen with the ability to obtain DoD Security Clearance Required.
Previous experience as a U.S. Air Force Maintenance MSgt or Navy AEC,
ATC or AMC. Familiarity with the MIL-STD-1472 a plus. A working
knowledge of AFOSHSTD 91-100, AFI 36-2232, AFI 37-123, and TCMR.
Security Clearance Required.

G.  Logistics Management Analyst 3, Posting ID:  106177
Description:
Responsibilities include analysis and development of requirements for
maintenance, spares, support equipment, technical data, training, and
facilities. Candidate will be responsible for all phases of product
development, with performance of design for supportability, trade
studies, detailed task analysis, Reliability Centered Maintenance
(RCM), understing of Provisioning and LSA per
MIL-STD-1561B/MIL-STD-1388 is a must. Experience in SORAP process for
equipment and geneation of Integrated Logistics Support Plans.
Position responsibilities include direct interface with customer,
travel and ability to multitask. Basic Requirements: BS degree in
electrical engineering or mathematics plus a minimum of nine years of
related experience or an MS degree in electrical engineering or
mathematics and a minimum of seven years of related experience. The
applicant must be aware of the Systems Engineering approach and
understanding of information technology systems and networks.
Preferred Experience: A candidate with excellent communication skills
and the ability to work in an Integrated Product Team atmosphere.
Experience with Technical Documentation and/or Military Standards are
desired. Verbal and writing skill are required to discuss analysis
and results. Innovative thinking is a key characteristic for this
position. Security Clearance Required. No relocation is available for
this position. Comparable work exp may be substituted for degree
requirements. Security Clearance Required.

H. Logistics Management Analyst 3, Posting ID:  109982
Description:
Determines requirements for ILS processes within the AMS campus
business areas. In this position, the candidate must have experience
with NGC product lines or military equivalent experience in Aircraft
Integration/field Support, MR-TCDL, Commercial Aircraft Support,
Communcations System Logistics systems. This project lead position
supports the preparation of proposals, proposal work statements and
specifications, logistics operating budgets, and financial
terms/conditions of the contract. Establishes and monitors adherence
to program plans and schedules, identifies program problems and
obtains solutions. Familiarity with DoD acquisition procedures will
be a plus for this position. Experience in ILS logistics elements or
extensive maintenance supervision of military aviation systems will
be a plus for this position. Experience in the development of PBL
contracts or award-fee sustainment contracts will be a plus. Must
possess strong organizational skills and interpersonal skills to
communicate effectively with all levels of management. Requires
ability to work independently without extensive day-to-day
supervision. Must display appropriate presentation skills. Will
require the ability to obtain a security clearance to the secret
level. Some relocation assistance maybe available. Education: -
Bachelors degree plus 5 or more years of relevant experience, or
Bachelors degree plus 6-9 years of relevant experience. Common Job
Description: Reviews field support requirements and recommends tool
and test equipment. Establishes calibration requirements for field
systems/equipment including all maintenance tasks. Performs
maintenance and maintainability demonstrations for customers. Reviews
handbooks for technical adequacy. Assists in the development of
maintenance engineering and logistics support. Plans and contributes
to proposal efforts. Security Clearance Required. Candidate requires
a BA/BS in Supply Chain, Industrial Engineering, Business or Computer
Science. Minimum 3 years of Materials/Procurement/Planning/Production
Control or related experience. Fundamental knowledge in Databases and
SAP is required. US citizenship required. Must have the ability to
obtain a security clearance. Excellent organization, communication,
teamwork, and interpersonal skills MULTIPLE POSITIONS. Security
Clearance Required.

I. Material Analyst 3, Posting ID:  110107
Description:
Candidate will be responsible for administering and supporting
production control and planning activities and responsibilities. This
could include specific cell assignment for oversight, coordination
and follow through of planned orders through conversion and kitting
to ultimate release and follow in the manufacturing cell. Primary
interface for all communications with functional areas and
departments, interacts with manufacturing, production control,
inventory, MRP, program and engineering personnel to ensure
appropriate scheduling and material flow for cell production.
Additional responsibilities could include oversight of expense and
kiosk material, supplier communications as well as problem resolution
and process improvement. Candidate will also support department in
the creation, visibility and maintenance of department metrics and
data collection. Must have the ability to develop complex databases
using MS Excel and MS Access and be able to generate necessary
reports to produce metrics, charts and graphs in MS PowerPoint and
other software packages. Must have the ability to develop and
maintain a BOM. Good technical foundation and knowledge of materials,
assembly/manufacturing processes, procurement practices and
SAP/MRP/ERP techniques. May be a band level 2 or 3 based on
experience. Candidate requires a BA/BS in Supply Chain, Industrial
Engineering, Business or Computer Science. Minimum 3 years of
Materials/Procurement/Planning/Production Control or related
experience. Fundamental knowledge in Databases and SAP is required.
US citizenship required. Must have the ability to obtain a security
clearance. Excellent organization, communication, teamwork, and
interpersonal skills MULTIPLE POSITIONS. Security Clearance Required.

J. Material Analyst 4, Posting ID:  110098
Description:
The primary responsibility of this position is to function as the
Support Hardware Manager of the Product Support Logistics Material
Group. In this role, the individual will lead personnel that provide
spares, material, repair and supply chain management support for
international and domestic programs. Responsibilities include
management and execution of existing contracts, including meeting
schedule, cost, and financial goals, development of new capabilities
using internal and external investment, and acquisition of new
business. The individual will provide the day to day operational
direction to all personnel assigned to the group, will interface with
product support, engineering, business management, and Global Supply
Chain personnel, and with U.S. and international government
personnel. Specific tasks include management of Logistics Material
requirements, Provisioning, DCN, spares ordering and tracking,
hardware tracking and statusing, material delivery, Diminishing
Manufacturing Resources/Material Shortages, Interim Contractor
Support (ICS), and Repair of Repairables (ROR) programs. The
individual will be responsible to the Product Support IPT lead for
metrics, data, contractual assessments for Award Fees/CPARS and other
supportability information as required. The individual will be
responsible for the people, processes, tools, and capability
development to support IPT business capture and contract executions.
Basic Qualifications: BS degree or equivalent with 6 years related
experience and 2 years supervisory experience. The individual must
have in-depth knowledge and expertise in DOD Acquisition policies,
DoD industry best practices in Supply Chain Management (SCM), and
leadership of Logistics Material personnel. Secret clearance
required. Preferred: Actual experiences in the areas of PBL and SCM
are highly desired. Security Clearance Required. Excellent
organization, communication, teamwork, and interpersonal skills
MULTIPLE POSITIONS. Security Clearance Required.

K. Procurement Assistant 3, Posting ID:  110077
Description:
Plans, schedules and manages the efficient movement of material from
receiving or the warehouse to production. Develops raw material
requirements and scheduling requirements from engineering
specifications and production schedules and plans and manages
material movement with purchasing, warehouse, and production. May use
Material Requirements Planning (MRP) systems. May negotiate lead
times with suppliers and manage schedules for timely delivery.
Advises management of the status of work in progress, material
availability, and potential production problems to ensure that
personnel, equipment, materials, and services are provided as needed.
Schedules equipment and personnel, confirms material supply and
demands, prepares work orders or purchase requests for the production
or purchase of components or parts based on a master production
schedule, shop load and inventory requirements. Coordinates
interdepartmental activity with quality assurance, manufacturing,
purchasing, engineering, inventory control, traffic, etc.; schedules
and expedites the movement of parts by means of work orders, stock
transfers and requests for shipping orders. SAP specific duties
include validation of planned production orders, verification of
stock location, quantity and program assignment, generates/maintains
and actions shortage lists, manages/adjusts schedule dates dependent
on WIP or other, validates production order integrity prior to
closing order to stock. Provides input to program schedules. Prefer
Candidate has a BS/BA. Years of experience can be traded for degree
requirement. Candidate must be able to exhibit excellent
communication skills, both verbal and written. Proven ability to
excel in a complex environment, which includes changing priorities,
multiple customers, cross functional handoffs, etc. SAP required.
Competent using Excel, Microsoft Project, Microsoft Word. Must have
or be able to obtain a secret clearance. Should be well organized,
effective working independently as well as in a group environment,
able to handle multiple assignments and possess good oral and written
communication skills Security Clearance Required.

L.  Cost Account Mgr (CAM) 3, Posting ID:  110199
Description:
Duties to include Logistics System Engineering Programs financial
analysis and reporting for key logistics initiatives. Candidate will
coordinate, prepare and present business data for program management
reviews, support WBS development, proposal preparation, cost risk
assessment and fact-finding, budget baselining, prepare visibility
reports, performance measurement (EVMS), variance analysis,
development of estimates to complete. The candidate will also be
responsible for providing program data for financial forecasting and
reporting. The candidate must also be capable of performing work
under general direction and be able to plan and schedule activities
independently to accomplish objectives. The ability to obtain a
Security Clearance is required. Qualifications: Bachelors Degree in
Finance, Business Administration or Accounting, a minimum of 6-9
years of relevant experience with the above stated essential skills.
Experience in the use of SAP and Earned Value techniques and
procedures. Security Clearance Required. Job Description: Sets up
cost control system, monitors and controls costs and schedules on
contracts requiring validated cost schedule control system. Performs
analyses and prepares reports in order to ensure that contracts are
within negotiated and agreed-upon parameters and government cost
control guidelines. Prepares budgets and schedules for contract work
and performs and/or assists in financial analyses such as funding
profiles, sales outlook, and variance analysis. Prepares program
plans to ensure program requirements and statement of work are
captured and scheduled. Performs schedule risk assessments to
identify and mitigate program cost and scheduling risks. Ensures
adequate funding availability by maintaining accurate records of
expenditures, directing preparation of expenditure projections, and
submitting timely requests for additional funding to the government.
Incorporates contractual changes into control systems by staying
aware of outstanding work against each contract in order to maintain
realistic contract cost and schedule baselines. 6 Years with
Bachelors; 4 Years with Masters Relocation Assistance maybe available
based on qualifications. Candidate requires a BA/BS in Supply Chain,
Industrial Engineering, Business or Computer Science. Minimum 6 years
of Field Service Support. Control or related experience. Fundamental
knowledge in Databases and SAP is required. US citizenship required.
Must have the ability to obtain a security clearance. Excellent
organization, communication, teamwork, and interpersonal skills
MULTIPLE POSITIONS. Security Clearance Required.

M. Engineer Field Lead 3, Posting ID:  110093
Description:
Field Engineering & Services: Individual will provide technical
leadership and oversight for a team of electronic techs. Systems
Technician Team will work on site with various types of
communications suites and systems. Job tasks include fabrications,
installation, modification, troubleshooting, ground and flight
testing of various sensors and systems. These tasks include, but are
not limited to the following types of systems: Communications, RF
collection, EO/IR and Radar. Efforts include: 1)Providing technical
program oversight 2) Providing schedule, technical performance, and
risk management status to Program Manager 3) Daily interface with
contract customer 4) Coordination of engineering efforts 5) Ensuring
the sustain maintenance is maintained to contract standards. 6)
Position requires an intensive background investigation at Customer
level; therefore, candidates must possess a current security
clearance, and be willing to comply with background investigation
requirements. Security Clearance Required. Candidate requires a BA/BS
in Supply Chain, Industrial Engineering, Business or Computer
Science. Minimum 15 years of Field Service Support. Control or
related experience. Fundamental knowledge in Databases and SAP is
required. US citizenship required. Must have the ability to obtain a
security clearance. Excellent organization, communication, teamwork,
and interpersonal skills Security Clearance Required.
POC:  Dirk Rippelmeyer, Dirk.Rippelmeyer@ngc.com

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Company: PCL Construction, Inc.
Title: Estimator
Type: Full Time
Education: Bachelors
Location: San Marcos - California
 
Description:
TAKE CHARGE! Stand out with a leader. PCL is a construction leader in buildings, infrastructure and heavy industrial markets, with a long tradition of excellence that spans over a century. We are a 100% employee-owned group of independent operating companies. With an annual volume exceeding $6 billion, we are ranked as the 8th largest contractor by Engineering News Record. We have also been recognized as a “Best Place to Work” by numerous publications. Our people have helped us stand out as one of North America’s leading general contracting organizations. We’re always looking for new talent--dynamic individuals who can bring enthusiasm and innovative solutions to every project. We currently have an exceptional opportunity for an experienced Estimator for our civil division, PCL Construction Inc. to work in San Diego, CA. This position will be responsible for estimating water treatment, waste water treatment, pump stations, etc. EEO/AA  M/F/D/V
 
 
Additional Requirements:
A successful candidate should have an undergraduate degree in Civil or Mechanical Engineering or Construction Management or like experience. 10+ years experience (preferably with most of the experience in Water/Wastewater Estimating). Special consideration will be given to experience gathered in the Southern California area.
 
Notes:
We offer exceptional benefits including health and dental, 401(k) and section 125 plans, long term disability insurance, life insurance, bonus compensation, equity participation, 3 weeks of vacation and much more!
The PCL family of companies carries out its construction operations through a number of independent operating companies which operate in different construction markets or geographic areas across North America.
 

Contact Information
PCL Construction, Inc.
Manuel Valdivia
1711 W. Greentree Dr. #201
Tempe, Arizona, 85284
Ph: 4807632781
FAX: 4808298252
Email: mvaldivia@pcl.com