D.  Dahlgren, VA, Technical Project Manager, JR 42180

Duties:

CACI is looking for an experienced Project Manager candidate for a Navy Surface Ship Technical/Engineering opportunity. The successful candidate will lead and manage a team of surface ship technical and engineering specialists supporting various technical and programmatic requirements for W Department, NSWC Dahlgren, VA. The CACI Project Manager will participate and manage technical reviews, studies/analysis, integrated product teams, manage project budgets and employee requirements and various other corporate and client requirements. 

Required Qualifications: Must have a current DoD SECRET Security Clearance to qualify.

Typically requires bachelor's degree or equivalent, and ten to twelve years of related general program management experience, including three to five years of supervisory/management experience.  This experience must include:

·        10 to 12  years acquired in a relevant area such as combat system computer program development/certification, combat/weapons system development/modernization, or similar program experience. 

·        experience in traditional program management tasks including project planning, tracking, and oversight; project reporting; budget planning and execution; engineering; quality assurance; configuration management; risk management; and metrics identification, analysis, and reporting.

·        8 years of specific surface ship Technical Program Management experience in at least three of the following specific technical program management areas within the past five years; 

o       Combat system planning, tracking, and oversight, including management of the computer program requirements,

o       Metric identification, collection, and analysis for combat system development, maintenance, and certification,

o       Tactical system certification from requirements definition through development, test, authorization/certification, and installation,

o       Strategic, trade-off, and impact studies to accomplish process improvement, infrastructure reduction, and economies of scale,

o       Tactical program/project risk identification, mitigation, and management,

o       Combat system dependency identification, development critical path identification, assessment, and analysis,

o       Multi-project management in a matrix organization,

o       Tactical system resource estimation, scheduling and coordination, and/or Combat system CM and Fleet modernization.

Desired Qualifications: Masters degree in relevant field (engineering, MBA) is desired.

Please e-mail detailed (no page limit) chronological resume, clearly showing required qualifications in MS Word format to: csale@caci.com, reference Position # JR 42180

E.  Norfolk, VA, OOMA Database Analyst, JR 45239

Duties:

CACI has an immediate opening for an OOMA Database Analyst in our Norfolk, VA location.  The Database Analyst provides comprehensive Naval aviation database support to the Navy software development activity responsible for the Optimized Organizational Maintenance Activity (OOMA) program.  The database analyst will provide Tier 3 level support to OOMA users and Naval commands around the world who utilize the OOMA aviation maintenance system.  The analyst will diagnose and correct database table errors, Sybase replication errors, and will research, diagnose, and correct anomalies in the OOMA system.  He/she will also assist the SPAWAR development team as they develop in-house software tools to assist in this effort.  

Required Qualifications: Must have a current DoD SECRET Security Clearance to qualify.

Typically requires a BS degree in Physical Sciences, Mathematics, Computer Science, Management Information Systems, Statistics, or Engineering or equivalent experience and five to seven years of related database analysis/management experience.  This experience must include:

·         Six years of experience in technical specifications development, process analysis and design, technical problem solving, and analytical/logical thinking.

·         Direct experience with data base design, development, implementation, maintenance, life cycle support and performance evaluation.

·         Design and implementation of data base schemas, sub-schemas, and sizing changes and enhancements.

·         Design of program utilities needed to monitor data base efficiency and integrity.

·         Design, programming, and testing software.

·         Training programmers in proper use of data base verbs.

·         Maintaining data base documentation.

·         Data base administration.

·         Design and implementation of physical and logical aspects of a medium to large scale data base.

·         Systems analysis and design using object based programming in a client server architecture.

·         Programming in a DBMS or RDBMS. 

·         Significant hands on experience in Sybase database management.

·         Experience in OOMA aviation software and Naval aviation maintenance procedures is necessary to fully support the customer. 

Desired Qualifications:

·         Sybase replication services management experience is invaluable

·         Knowledge & experience in CMMI methodologies or ISO 9001 Quality Management Systems is very helpful.  Please cite.

Please e-mail detailed (no page limit) chronological resume, clearly showing required qualifications in MS Word format to: csale@caci.com, reference Position # JR 45239

POC:  Connie Sale, csale@caci.com

2.  Cubic Corporation Opportunities, San Diego, CA:

A. Senior Electrical Engineer, REQ #1209

ESSENTIAL JOB DUTIES: Develops circuit, component, subsystem, and equipment interfaces and procurement specifications. Designs programmable logic systems. Prepares design specifications, analyses, and recommendations. Prepares design and operation objectives, specifications, and resource needs. Recommends test control, strategies, apparatus, and equipment. Supports the interfaces with customers, contractors, and marketing vendors. Evaluates vendor capabilities to provide required products or services. Conducts in-house design reviews and technical meetings.

Prepares design proposal to reflect cost, schedule, and technical approaches. Monitors project status and progress. Manages budget and schedule for electrical engineering tasks. Keeps abreast of improvements in electronic engineering techniques. Solid understanding of good RTL code and programmable logic system design practices. Generation of RTL code (VHDL, Verilog) for programmable logic (FPGA, CPDL) systems. Conversion of system requirements into synthesizable code using good coding practices and industry standard/vendor tools such as Xilinx ISE. Testbench simulation of RTL designs using industry standard tools such as ModelSim. Integration lab hardware test and debug. High-level system design of programmable logic systems that required integration with hardware and software systems. Conversion of high-level system requirements to detailed programmable logic requirements. Integrating programmable logic designs with hardware and software systems. Experience in all aspects of the product lifecycle from design through integration, testing, fielding, and support.

EDUCATION/EXPERIENCE REQUIRED: Four-year college degree in electronic engineering or science discipline plus five years experience or an applicable Masters of Science degree and three years of related experience. Desired experience in designing, developing, and testing hardware. Effective written and oral communication skills.   Ability to use typical office automation products such as word processors and spreadsheets. Knowledge of customer needs and competing products. 

US Citizenship Required.

B. Senior Electrical Engineer, REQ #1210

ESSENTIAL JOB DUTIES: Develops circuit, component, subsystem, and equipment interfaces and procurement specifications. Designs digital, analog, or radio frequency circuits, components, and subsystems. Prepares design specifications, analyses, and recommendations. Performs circuit interconnection or subsystem prototype assembly. Prepares design and operation objectives, specifications, and resource needs. Recommends test control, strategies, apparatus, and equipment. Supports the interfaces with customers, contractors, and marketing vendors. Evaluates vendor capabilities to provide required products or services. Conducts in-house design reviews and technical meetings. Prepares design proposal to reflect cost, schedule, and technical approaches. Monitors project status and progress. Manages budget and schedule for electrical engineering tasks. Keeps abreast of improvements in electronic engineering techniques. Specific experience in the following areas is required: Low noise analog circuit design, transimpedance amplifier circuits for APD and PIN detectors, understanding of circuit design and PCB layout techniques for EMI and Tempest requirements, power reduction techniques for battery powered circuits. Measurement of noise performance in circuits to include: Noise Figure, Total rms voltage noise, Input referred current noise in a TIA, threshold power in an optical receiver circuit (1 sigma). Measurement of bandwidth, IP3, gain, P1dB, and efficiency in RF circuits.

EDUCATION/EXPERIENCE REQUIRED: Four-year college degree in electronic engineering or science discipline plus five years experience or an applicable Masters of Science degree and three years of related experience. Desired experience in designing, developing, and testing hardware. Effective written and oral communication skills.   Ability to use typical office automation products such as word processors and spreadsheets. Knowledge of customer needs and competing products. 

US Citizenship Required.

C. Associate Electrical Engineer, REQ #1211

ESSENTIAL JOB DUTIES: Supports basic design of digital, analog or radio frequency hardware.  Develops and analyzes design of circuits. Obtains, correlates and analyzes technical information for designated products and/or customer applications. Reads, interprets and prepares data for engineering drawings. Performs circuit interconnections.  Prepares test plans and conducts tests. Prepares engineering documentation.  Assists in the writing of circuit or component specifications.  Prepares reports, charts and graphs. Keeps informed of improvements in electrical engineering techniques. Basic understanding of electronic circuit card technology. Able to derive simple system level electrical requirements. Voltage current and resistance ratings of parts. Connector selection, orientation, and mating. System wiring to minimize crosstalk and EMI. Able to read modify and interpret schematic drawings. Able to use schematics and CCA artwork drawings to determine the location of nodes on a circuit for troubleshooting and testing purposes. Able to operate simple test equipment (oscilloscopes, function generators, signal generators etc.)

EDUCATION/EXPERIENCE REQUIRED: Four-year college degree in electronic engineering or related technical discipline.  Effective written and oral communication skills. Ability to use typical office automation products such as word processors and spreadsheets. US Citizenship Required.

D. Electrical Engineer, REQ #1212

ESSENTIAL JOB DUTIES: Conducts or participates in research, design, development, and testing of digital, analog, or radio frequency hardware to include circuit design and sub-system integration for designated products and/or customer applications. Assesses the severity of problems, determines corrective action, resolves technical problems, performs fault isolation, and implements solutions. Designs electronic breadboard systems. Specifies materials, equipment and supplies. Modifies existing engineering designs. Conducts prototype construction and tests. Logs, compiles and evaluates engineering data. Writes engineering manuals, procedures, and reports. Analyzes equipment to establish operating data. Develops logic flowcharts and block diagrams. Supports on-site installation activities. Assists in preparing engineering design specifications. Assists in engineering drawing and specification inputs. Assists in the preparation of specifications and assessment of vendor products. Applies and maintains quality standards. Keeps abreast of improvements in electronic engineering techniques. Specific Requirements Include: Good understanding of basic DC power supply topologies, switching (Buck, Boost, SEPIC, Flyback), linear LDO. Experience implementing electrical circuits, specifically linear and switching power supplies. Choose parts and derive circuit values from voltage current, size, and cost requirements. Simulate designs and verify performance. Work with electrical designers to optimize layout under size, cost, and power dissipation constraints.

EDUCATION/EXPERIENCE REQUIRED: Four-year college degree in electronic engineering or science discipline, plus two years of related experience or an applicable Master of Science degree. Desired experience in designing, developing, and testing hardware. Effective written and oral communication skills. Ability to use typical office automation products such as word processing and spreadsheet programs. US Citizenship Required.

E. Electrical Engineer, REQ #1213

Conducts or participates in research, design, development, and testing of programmable logic systems and integration with hardware/software subsystems. Assesses the severity of problems, determines corrective action, resolves technical problems, performs fault isolation, and implements solutions. Designs electronic breadboard systems. Specifies materials, equipment and supplies. Modifies existing engineering designs. Conducts prototype construction and tests. Logs, compiles and evaluates engineering data. Writes engineering manuals, procedures, and reports. Analyzes equipment to establish operating data. Develops logic flowcharts and block diagrams. Supports on-site installation activities. Assists in preparing engineering design specifications. Assists in engineering drawing and specification inputs. Assists in the preparation of specifications and assessment of vendor products. Applies and maintains quality standards. Keeps abreast of improvements in electronic engineering techniques. Specific experience in the following areas is required: Solid understanding of good RTL code and programmable logic system design practices, generation of RTL code (VHDL, Verilog) for programmable logic (FPGA, CPDL) systems, conversion of system requirements into synthesizable code using good coding practices and industry standard/vendor tools such as Xilinx ISE, Testbench simulation of RTL designs using industry standard tools such as ModelSim, integration lab hardware test and debug.

EDUCATION/EXPERIENCE REQUIRED: Four-year college degree in electronic engineering or science discipline, plus two years of related experience or an applicable Master of Science degree. Desired experience in designing, developing and testing hardware. Effective written and oral communication skills. Ability to use typical office automation products such as word processing and spreadsheet programs. US Citizenship Required. 

POC: Ryan Hazelton, ryan.hazelton@cubic.com (858)337-8618